Pass Exam With Full Sureness - NS0-162 Dumps with 61 Questions
Verified NS0-162 dumps Q&As - 100% Pass from PDFTorrent
Network Appliance NS0-162 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 24
Click the Exhibit button.
You have a Linux host that is unable to access the namespace shown in the exhibit.
What is causing the problem?
- A. A subsystem containing the Linux host's NQN must be provisioned.
- B. Additional LIFs are required to support the Linux host.
- C. The block size must be 8 KB to support the Linux host filesystem.
- D. Additional NVMe namespaces are required for the Linux host.
Answer: A
NEW QUESTION 25
Click the Exhibit button.
A customer has an issue with performance on an NVMe solution. The SV Misusing all four ports shown
in the exhibit.
In this scenario, how would the customer improve the host performance?
- A. Remove support of the FC protocol and only use NVMe.
- B. Move some of the network interfaces from 2a to 2c and 2d.
- C. Move all of the network interfaces to port 2a.
- D. Change the SFP+ in the controllers from 32 Gbps to 64 Gbps.
Answer: B
NEW QUESTION 26
Your company has recently decided to stop using the Fibre Channel Protocol (FCP) in the data center.
You are asked to decommission FCP and reuse any UTA2 ports to 10 GbE.
Which two steps are involved in this task? (Choose two.)
- A. Reboot the nodes.
- B. Remove the FCP license from all nodes in the cluster.
- C. Destroy any FC LIFs hosted on UTA2 ports.
- D. License additional ports for 10 GbE connectivity.
Answer: A,C
NEW QUESTION 27
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task? (Choose three.)
- A. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
- B. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
- C. Enable jumbo frames with an MTU of 9216 for your switches.
- D. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.
- E. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
Answer: A,C,E
NEW QUESTION 28
Which SVM subtype is used by an SVM-DR target?
- A. default
- B. sync-source
- C. data
- D. dp-destination
Answer: D
NEW QUESTION 29
You want to add SSDs to existing HDD aggregates.
Which NetApp tool helps you to validate how many SSDs would Improve performance?
- A. OnCommand Workflow Automation
- B. Automated Workload Analyzer
- C. Active IQ Unified Manager
- D. ONTAP System Manager
Answer: D
NEW QUESTION 30
Exhibit.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
- A. NVMe
- B. SMB
- C. ISCSI
- D. NFS
Answer: C,D
NEW QUESTION 31
You are the administrator of your company's ONTAP 9.7 storage systems. You are asked to configure your ONTAP system so that the backup department can perform NDMP backups of your SVM data.
Which two steps must be completed to accomplish this task? (Choose two.)
- A. Allow the NDMP protocol on your SVM.
- B. Enable the NDMP service on your SVM.
- C. Install the NDMP license on all nodes in your cluster.
- D. Create a cluster peer between the source SVM and the NDMP destination.
Answer: A,B
NEW QUESTION 32
Selective LUN Map (SLM) is used for which function in a NetApp SAN solution?
- A. to maximize performance between the LUN and the host
- B. to increase the number of paths from the LUN to the host
- C. to reduce the number of LUNs presented to the host
- D. to decrease the number of paths from the LUN to the host
Answer: C
NEW QUESTION 33
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company's ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl. You also discover that the IP subnet that Is used for WidgetsClusOl's intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?
- A. broadcast domains
- B. ONTAP subnets
- C. IPspaces
- D. VLANs
Answer: C
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Protection_and_Security/SnapMirror/How_to_create_and_configure_Cluster_Peering_with_designated_InterCluster_LIFs_using_IPSpaces
NEW QUESTION 34
Exhibit.
You create a storage virtual machine (SVM) called SVM500 that is provisioned for iSCSI. After creating a LUN in the SVM and mapping it to an igroup, the attached VMware hosts are unable to mount the LUN.
Referring to the exhibit, what is the issue?
- A. The initiator is a member of igroups of different OS types.
- B. The igroup contains the wrong protocol.
- C. The igroup contains multiple Initiators.
- D. The igroup does not contain the appropriate initiators.
Answer: C
NEW QUESTION 35
Click the Exhibit button.
You are configuring your tape backup software to authenticate to your single-node cluster by using NDMP.
Referring to the exhibit, which LIF do you use to connect?
- A. cluster1-01_mgmt1
- B. cluster_mgmt
- C. cluster1-01_ic1
- D. data_lif1
Answer: C
NEW QUESTION 36
Which two statements are true about NVMe? (Choose two.)
- A. LUNs are mapped to Initiator groups.
- B. NQNs are added to namespaces.
- C. NQNs are added to subsystems.
- D. Namespaces are mapped to subsystems.
Answer: C,D
Explanation:
Reference:
Add the host NQN to the subsystem: vserver nvme subsystem host add -vserver SVM_name -subsystem Subsystem_name -host-nqn Host_NQN:subsystem.Subsystem_name Map the namespace to the subsystem: vserver nvme subsystem map add -vserver SVM_name -subsystem subsystem_name -path path
NEW QUESTION 37
You are the administrator of your company's ONTAP 9.7 systems. You have an AFF A220 in your main data center and a FAS2720 at a second data center on the same campus. You must ensure the highest possible rate of data security and availability with all snapshots.
In this scenario, which ONTAP solution do you implement?
- A. an SVM-DR relationship with identity preserve disabled for your SVMs
- B. a SnapMirror relationship with an update interval of one minute
- C. an SVM-DR relationship with identity preserve enabled for your SVMS
- D. a SnapMirror Synchronous relationship between AFF and FAS
Answer: C
NEW QUESTION 38
You are using a 4-node cluster, and the node containing epsilon fails.
In this scenario, which node contains epsilon?
- A. Epsilon is automatically reassigned to a healthy node in a different HA pair.
- B. Epsilon needs to be manually assigned to the surviving node of the HA pair.
- C. Epsilon is automatically reassigned to the surviving node of the HA pair.
- D. Epsilon needs to be manually assigned to a healthy node in a different HA pair.
Answer: A
NEW QUESTION 39
Click the Exhibit button.
Referring to the exhibit, a customer is experiencing performance problems on an SVM supporting NVMe/FC. You review the physical FC ports that are connected into the 32 Gbps switches for cluster tme-a700.
In this scenario, what is causing the performance problems?
- A. Port 2a needs a 16 Gbps SFP+ installed.
- B. Port 2b has a 16 Gbps SFP+ installed.
- C. Port 2a needs more network interfaces added to the physical port.
- D. Port 2b has two many LIFs running across the physical port.
Answer: B
NEW QUESTION 40
You want to create a new SVM for serving NFS data using the Storage Virtual Machine (SVM) Setup wizard.
In this scenario, which object is created automatically during the setup process?
- A. a data LIF named after the SVM with the suffix_nfs_lif
- B. a data aggregate named after the SVM with the suffix_nfs_aggr1
- C. an export policy named after the SVM with the suffix_nfs_exp1
- D. a data volume named after the SVM with the suffix_nfs_vol1
Answer: A
NEW QUESTION 41
Click the Exhibit button.
Your ONTAP 9.7 cluster failed a security audit on the management control plane. Your network security team asked you to allow only cluster1 and SVM1 management on the 192.168.1.0/24 subnet.
In this scenario, where do you apply the default-management service policy shown in the exhibit?
- A. firewall
- B. port
- C. LIF
- D. DNS
Answer: C
NEW QUESTION 42
You want to prevent a single file from filling up a single constituent in a FlexGroup.
Which FlexGroup feature in ONTAP 9.7 will accomplish this task?
- A. Snapshot autodelete
- B. Flash Pool
- C. elastic sizing
- D. fractional reserve
Answer: C
NEW QUESTION 43
What is the default RAID policy for aggregates created with 10 TB disk drives?
- A. RAID-DP
- B. RAID4
- C. RAID-TEC
- D. RAIDO
Answer: C
NEW QUESTION 44
Your ONTAP cluster serves data and backup traffic running on the same physical port. You must isolate backup traffic from your production network traffic.
Which two actions must be performed to accomplish this task? (Choose two.)
- A. Create a broadcast domain.
- B. Create a VLAN.
- C. Create IPspaces.
- D. Create a namespace.
Answer: A,B
NEW QUESTION 45
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company's ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl.
You also discover that the IP subnet that Is used for WidgetsClusOl's intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?
- A. broadcast domains
- B. IPspaces
- C. ONTAP subnets
- D. VLANs
Answer: D
NEW QUESTION 46
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the data-protocol option
- B. the failover-policy option
- C. the subnet-name option
- D. the auto-revert option
Answer: A
NEW QUESTION 47
Click the Exhibit button.
The exhibit shows a Windows 2019 server with two FC HBAs using ALUA.
How many paths to LUN1 are active/optimized?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 48
......
NS0-162 Dumps Full Questions - Exam Study Guide: https://www.pdftorrent.com/NS0-162-exam-prep-dumps.html
Pass NS0-162 Exam in First Attempt Guaranteed 2022 Dumps: https://drive.google.com/open?id=1-Q9AcD3Yk9pkQiOXXi2Bsy_YQGJyy7Tr